PAWELL Solid-State 118,000 mAh Battery Pack for UAVs
PAWELL Solid-State 118,000 mAh — the battery is focused on the operation of large UAVs and long-range drones, where every gram of weight affects the duration of the mission. Solid-State technology with a high energy density of ~400 Wh/kg ensures stable operation and an increased level of safety compared to classic Li-ion or LiPo batteries, supporting operation with high load currents up to 900 A.
PAWELL Solid-State 118,000 mAh is used on agricultural drones, cargo and bomber drones where continuous operation of the equipment, preservation of the payload, and efficiency of every gram of the system are important.
- High energy efficiency — 2620 Wh at a weight of 6.3 kg and a density of ~400 Wh/kg, which provides a weight reduction of ~30% compared to typical Li-ion / LiPo analogues of the same energy capacity.
- High load operation — supports up to 900 A peak current for systems with peak currents.
- Resistance to low temperatures — stable operation at discharge down to –20 °C.
- Quick preparation for re-launch — standard charging current of 55 A.
- Take-off mass optimization - 118 Ah capacity at 6.3 kg weight allows for increased flight duration or payload without exceeding mass restrictions.
- Compatibility with 6S platforms - the nominal voltage of 22.2 V ensures integration into large Vampire-type bombers, hexa- and octocopters, agrodrones, custom 6S assemblies and large wings.
Technical details
Solid-State 118,000
Electrical characteristics:
- 6S1P configuration
- Solid-State Elements
- Rated voltage: 22.2 V
- Capacity: 118Ah ( 2620Wh)
- Voltage range: 15-25.2 V
- Peak discharge current: 350A
- Operating temperature: from -20°C to +65°C
Physical characteristics:
- Size (L × W × H): 385 × 70 × 110 mm
- Weight: 6.7 kg
- Outer material: thick layer of heat shrink
Charging characteristics:
- Recommended: up to 55A/4.2V
Connectors
Power cable: AWG6
Power connector: QS-8s
Operating temperature:
Charging: 0°C to 45°C
Discharge: –20°C to 65°C
Storage temperature:
Short-term (<1 month): –10°C to 45°C
Long-term (>1 month): 0°C to 25°C
Humidity: ≤85% (relative humidity)
High energy density
High energy density keeps the design lightweight without sacrificing performance or battery life. Our builds reach maximum values of 400+ Wh kg
Automated laser welding
Robotic laser provides extremely high welding accuracy of 0.01–0.05 mm, which ensures greater reliability in battery operation
Serial production
Thanks to automation and proven processes, we guarantee the production of large batches, maintaining the high quality of each unit for your board.
Technical support
Our team is in touch after the purchase to provide technical support or advice, we are responsible for the reliability of each manufactured solution.